
Luxury vinyl plank
Waterproof click-lock or glue-down LVP. Kitchens, living rooms, bedrooms, whole homes.
- Click-lock and glue-down
- Laid over slab or plywood
- Rows staggered and locked tight
Luxury vinyl plank, laminate and click vinyl installed across Brevard County. Subfloor leveled, trim and transitions done, by the owner on the job.
Labor-only or supply and install. Same-day range.
The floor looks fine on day one. The problems show up in month three.
Planks laid tight to the wall with no expansion gap buckle in Florida heat. Planks laid loose separate at the seams. We leave the right gap under the baseboard and lock every row tight.
Vinyl plank follows whatever is under it. A slab with dips shows every one. We grind the highs, fill the lows and check with a straightedge before laying the first row.
Doorways, tile to vinyl, carpet edges. Half-finished jobs end at a bare seam. We cut and set the trim, T-molding and reducers, same job, same crew.
Click-lock or glue-down, on concrete slab or wood subfloor. You supply it or we do.

Waterproof click-lock or glue-down LVP. Kitchens, living rooms, bedrooms, whole homes.

Click laminate with underlayment. Old carpet or tile out, new floor in.

The part that decides how the floor feels. Leveled, sealed and finished at every edge.
Carpet out, tile out, planks in. What the room looks like when we pack up.









Our own jobs. Every photo on this page is a floor or bathroom we installed in Brevard County. Drag the line on the before-and-after to compare.
Send photos of the rooms and your ZIP. You get a range by text, usually the same day, priced by the square foot and the prep.
From your photo to the last transition strip.
Each room from the doorway, plus a shot of the planks if you already have them.
Square footage, what's coming out and subfloor condition set the range. Usually same day.
We check the slab for flatness and moisture, confirm the layout, lock the number and date.
Old floor out, subfloor leveled, planks laid, baseboard and transitions set, house swept.
Outside this list? Send your ZIP anyway. Depending on the size of the job, we may still make the drive.

What people ask before they text us about LVP and laminate.
Yes. Most of our vinyl jobs are labor-only. You buy the planks, we bring the underlayment, leveling compound, trim and tools. Just have the boxes on site a day or two ahead so they acclimate.
Sometimes. If the tile is solid, flat and the grout lines are shallow, a skim coat over it works. If it's cracked, hollow or uneven, we take it out. We tell you which at the walkthrough, not after.
Click-lock floats and goes down faster, good for most rooms. Glue-down is stiffer and better for big open areas, rolling chairs and heavy furniture. Show us the room and we'll tell you which one fits.
Yes, when it needs it. We run a straightedge across the slab, grind high spots and pour self-leveler in low ones. Planks follow whatever is under them, so this step is what keeps the floor from clicking and flexing later.
Yes. Baseboard or quarter round, T-molding between rooms, reducers to tile, stair nose on steps. The job ends when every edge is trimmed, not when the last plank clicks in.
Text it with your ZIP. You get a vinyl plank price range back, usually the same day.